Spesifikasi RIELLO 40 GS10M GS20M GAS BURNERS MODULATING
Gas Burner
GAS BURNERS (MODULATING)
RIELLO 40 GS10M GS 10/M 22 / 42 ÷ 105 kW GS 20/M 43 / 82 ÷ 194 kW
The Riello 40 GS/M series of two stage progressive or modulating gas burners, is a complete range of products developed to respond to any request of gas burners for hot air generator according to EN 1020.
These models complete the Riello 40 gas series which prides itself on many years of experience in all the world in the field of residential heating and soft industrial applications. This series of burners is available in two different models with an output ranging from 42 to 194 kW, divided in two different structures. Basic version of these models has two stage progressive operation. A simple modification, adding a component, permits obtaining modulating operation with a rate 1:4. The burners are supplied air fuel ratio control gas trains.
This more advanced version can better satisfy market needs for applications where modulation is requested to obtain highest plant efficiency. In developing these burners, special attention was paid to the ease of installation and adjustment, to maintaining the smallest size possible and obtaining high performance for modulating operation to fit into any sort of application available on the market. All the models are approved by the EN 676 European Standard and they conform to European Directives: Gas Appliances, EMC, Low Voltage and Boiler Efficiency.
Monoblock, gas burners, completely automatic, two stage progressive or modulating operation with a kit, made up of: - Ratio air/fuel controlled by checking both the air and the gas flows - Two pressure switches on the burner, to make sure the burner operation, detecting both the fan and the chimney functions
- Remote reset available
- Servomotor to drive the air damper to fully closed position at stand
-by, low and high fire position
- Turn down fire 1:4
- Fan with forward curve blades
- Single phase electric motor 230 V, 50 Hz
- Combustion head fitted with:
- stainless steel head cone, resistant to high temperatures
- ignition electrodes - ionisation probe - gas distributor
- flame stability disk
- additional device, to keep short the flame shape
- Protection filter against radio interference
- Microprocessor
-based flame control box, with diagnostic functions
- IP X0D (IP 40) electric protection level. Standard equipment:
- Hinge to turn the burner left
-side or right
-side for the maintenance position
- Flange insulation screen
- Screws and nuts for fixing the flange to the boiler
- 7-pin plug with capacitor for EMC
- 4-pin plug to connect the high-low thermostat
- Instruction handbook for installation, use and maintenance
- Spare parts catalogue.
